咨詢服務熱線

13153196856
0531-84222658

導軌式升降機(定做專用貨梯)

【產品類別】:  產品介紹  導軌式升降機是一種非剪叉式液壓升降機械設備·用于二三層工業廠房,餐廳,酒樓樓層間的貨物傳輸·高度在150-300mm,尤其適合不能開挖地坑的工作場所·并且無須上部吊點

【應用范圍】:...
全國銷售熱線:131-5319-6856
詳細說明:

  產品介紹

  導軌式升降機是一種非剪叉式液壓升降機械設備·用于二三層工業廠房,餐廳,酒樓樓層間的貨物傳輸·高度在150-300mm,尤其適合不能開挖地坑的工作場所·并且無須上部吊點,形式多樣化(單柱,雙柱,四柱).設備運行平穩,導軌式升降機的導軌一般為槽鋼、工字鋼,方管焊接制成,操作簡單可靠,貨物傳輸經濟便捷.

  用途

  不能到達要求的場合等比較難解決的狹小空間,可以量身打造高效率的送貨平臺。產品結構堅固,承載量大,升降平穩,安裝維護簡單方便,是經濟實用的低樓層間替代電梯的理想貨物輸送設備。本產品主要應用于化工、高溫、高壓、電廠、核工業基地、炸藥等防爆企業。

  功能

  *承載可高達30噸,實現多點控制,上下樓層互動聯鎖,達到安全使用;

  *現多點控制,上下樓層互動聯鎖,達到安全使用;

  *提升高度高,采用旁置油缸、或雙測式油缸,運行平穩、無噪聲、維修方便、使用壽命較長;

  *停電手動下降、緊急停止按鈕,方便、快捷、實用;

  *地坑深度一般為15cm-30cm,頂層高度不受限制,可根據現場環境定做使用;

  *層門可貫通,廠房內外可相互戳開,方便、節省空間;特別適合2-3層鋼結構廠房,內外部均可使用;

  特性

  液壓電梯在具備傳統曳引式電梯的安全裝置的同時, 還設有:

  *溢流閥:可防止上行運動時系統壓力過高

  *應急手動閥:電源發生故障時, 可使轎廂應急下降到比較近的層樓位置開門;

  *手動泵:當系統發生故障時, 可操縱手動泵打出高壓油使轎廂上升到比較近的層樓位置

  *管路破裂閥:當液壓系統管路破裂轎廂失速下降時, 可自動切斷油路停止下降;

  *油箱油溫保護:當油箱中油溫超過標準設定值時, 油溫保護裝置發生信號, 暫停電梯使用, 當油溫下降后方可啟動電梯。

  產品優勢

  成本低

  故障率低:由于采用了先進的液壓系統, 且有良好的控制方式,電梯運行故障率可降低。 耗電量少:液壓電梯下行時, 靠自重產生的壓力驅動,大幅度節能。

  土建優勢

  1、井道上方無需機房,頂層高度3.5米以上即可安裝。

  2、機房可設在井道半徑15米的范圍內,占有面積僅3-4平方。

  3、液壓電梯不設置對重裝置, 提高井道面積利用率。

  4、液壓電梯負荷、載重通過油缸直接作用于基坑,井道強度要求低,磚結構或磚混結構井道即可。

  安全穩定性優勢

  1、 溢流閥:可防止上行運動時系統壓力過高

  2、 應急手動閥:電源發生故障時, 可使轎廂應急下降到比較近的層樓位置開門,

  3、手動泵:當系統發生故障時, 可操縱手動泵打出高壓油使轎廂上升到比較近的層樓位置;

  5、油箱油溫保護:當油箱中油溫超過標準設定值時, 油溫保護裝置發生信號, 暫停電梯使用, 當油溫下降后方可啟動電梯。

  運行成本優勢

  1、故障率低:由于采用了先進的液壓系統, 且有良好的控制方式,電梯運行故障率可降低。

  2、耗電量少:液壓電梯下行時, 靠自重產生的壓力驅動,大幅度節能。

  CHAIN TYPE VERTICAL CARGO LIFT

  It’s a non-scissor type lift platform mainly used to convey the cargos in the 2-3 stroeys workshop/buildings,restaurant and hotel. Its mininum height is only 150-300mm and best choice for the working site wiout pit or the pit can not be digged. No hoisting above is required and the machine could have single,double or four pillars. The guiding rail is usually made of C channel, H beam or pipes by welding. The simple and easy operation makes the good transfer much easier.

  Purpose:

  Its mainly used in the narrow spaces and a customized & highly-efficient cargo lift. With the strong structure,high capacity,stable travelling and simple installation & maintenance it becomes an ideal conveyer tools among the storeys in the low buidings. Many anti-explosion companies have choosen our products like the chemical industry,high-temperature company,high voltage relative units, power factories and nuclear industrial base;

  FUNCTIONS:

  *Max. load capacity 30 metric tons, multi-point control,interlock among floors;

  *Huge lifting height, single or double lifting cylinder, smooth operation,low noise,easy maintenance and

  Long lifetime.;

  *In case of powe failure, the platform could lower down in the manula status. The machine also has theEmergency device for the unexpected accidents;

  *Pit depth usually from 15cm-30cm or no pit required;

  *Best choice for2-3 storeys steel structure building, indoor or outdoor;

  CHARACTERISTICS:

  Besides the safety devices that the tradiational lifting elevators have, it still have the followings:

  * Overflow valve: can prevent upward movement when the system pressure is too high

  * Emergency manual valve: power failure occurs, can make the capsules emergency down to the nearest floor open position;

  * Manual pump: when the system failure occurs, the manual type high pressure oil pump can be manipulated to make the car up to the nearest floor location

  * Pipeline rupture valve: when the hydraulic system pipeline rupture capsules stall falls, can automatically cut off oil stopped falling;

  * Tank of oil temperature protection: when the medium oil tank temperature exceeds the set value, the oil temperature protection device of signal, suspended the use, when the oil temperature drop rear can activate the elevator.

  PRODUCTS ADVANTAGES:

  -THE COST IS LOW

  -CIVIL ENGINEERING ADVANTAGE

  -SECURITY STABILITY ADVANTAGES

  -RUNNING COST ADVANTAGE

  技術參數(僅供參考)Technical Parameters: (only for reference)

型號Model#承載Load臺面尺寸Table size舉升高度Lifting height非工作高度Non-working height外形尺碼Dimension泵站
Pump station
SJDG3-2.43T2.0*2.0M2.4M660MM2.0*2.0*0.66m4KW/380V
SJDG2-52T2.1*1.2M5M870MM2.1*1.2*0.87m4KW/380V
SJDG1-4.51T2.1*1.5M4.5M800MM2.1*1.5*0.80m3KW/380V
SJDG5-6.55T2.2*1.6M6.5M1280MM2.2*1.6*1.28m5.5KW/380V
SJDG3-6.53T2.2*1.9M6.5M1520MM2.2*1.9*1.52m5.5KW/380V
SJDG**-NCustom-made according to the requirement 接受定制